|
|
|
|
These connectors should be available at any electronics store, or perhaps a computer store. It's the same as an IBM joystick connector.
Note![03/14/02] Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks. Note![01/04/07] Check the numbering on your connector. Most unwired connectors will have the numbers printed next to the holes or pins. |
|
![[DB-9 plug]](../grafx/conn_dsub15f.gif)
|
1 Common (GND) 10 NC 2 NC 11 Start 3 Select 12 C Button 4 D Button 13 A Button 5 B Button 14 Left 6 Right 15 Up 7 Down 8 +5v 9 D Button |
|
All contents (c)2007 GameSX.com unless otherwise noted. All trademarks copyright of their respective companies. GameSX.com assumes absolutely no responsiblility whatsoever for any sort of damages incurred while either viewing this information or doing anything with said information. If you don't like it, change the channel. Some of this information may have come from other sources, and GameSX.com in no way implies ownership of this information, and merely intends to provide a convenient source for finding this information. That said, I wrote this, and would appreciate your not lifting it for your own page without due credit. Mail us! |